| Momo Tank: | Type UN T11, T12, IMO4 portable; |
| Insulated, steam heated, without top side rails fitted. |
| Raukaha: | 30,000 -38,000 Litres +/- 1.5% |
| MGW: | 39,000 kg |
| Peehanga Hoahoa: | Pae 4 |
| Whakamatau Whakamatau: | Pae 6 |
| External Pressure: | Pae 0.41 |
| Te Mahana Hoahoa: | -40 °C ki + 130°C |
| Rauemi Waka: | SANS 50028-7 WNr 1.4402/1.4404 (C<0.03%), rite ki te 316L |
| Anga: Cold Rolled 2B mutu |
| Dished ends:Hot rolled or Cold rolled, and polished internally to 1.2 Micron CLA |
| Te Whakaaetanga Koraha: | 0.2 mm |
| Main Frame Material: | GB/T 1591 - Q355D or SPA-H (or equivalent) |
| Side Lifting Pockets: | Not fitted. |
| Makanga kokonga: | To ISO 1161 |
| Top: tank fitted with four ISO standard castings, width over casting: 2438mm. Obstruction plates welded in side facing apertures to prevent use. |
| Bottom: 4 off bottom castings, width over casting: 2550mm. |
| Handling Damage Protection: | Miss stacking stub tubes fitted, protection plates fitted to top and bottom faces of frame members adjacent to corner castings, stainless steel wear plates fitted to side faces of corner posts at midpoints. |
| Tank End Protection | Two removable stainless steel bumper bars will be fitted in front and rear of the tank. Tack welded against thief. |
| Waehere Hoahoa Waka: | ASME VIII Div.1/EN14025 where applicable |
| Radiography: | Shell: | Spot |
| Whakamutunga: | Full |
| Tari Arotake: | LR |
| Te tautuhi | I whakaaetia ia ipu mo te 3 te teitei o te tapae |
| Whakaaetanga Hoahoa: | IMDG T11, ADR/RID-L4BN, CSC, TIR, TC |
info@nttank.com
