टैंक प्रकार: | Type UN T11, T12, IMO4 portable; |
Insulated, steam heated, without top side rails fitted. |
क्षमता: | 30,000 -38,000 Litres +/- 1.5% |
एमजीडब्ल्यू: | 39,000 किलो |
डिज़ाइन का दबाव: | 4 बार |
परीक्षण दबाव: | 6 बार |
बाहरी दबाव: | 0.41 बार |
डिज़ाइन अस्थायी: | -40 °+ 130 सी°C |
पोत सामग्री: | SANS 50028-7 WNr 1.4402/1.4404 (C <0.03%), 316L के बराबर |
शैल: कोल्ड रोल्ड 2बी फिनिश |
Dished ends:Hot rolled or Cold rolled, and polished internally to 1.2 Micron CLA |
Corrosion Allowance: | 0.2 मिमी |
Main Frame Material: | GB/T 1591 - Q355D or SPA-H (or equivalent) |
Side Lifting Pockets: | Not fitted. |
कोने की ढलाई: | To ISO 1161 |
Top: tank fitted with four ISO standard castings, width over casting: 2438mm. Obstruction plates welded in side facing apertures to prevent use. |
Bottom: 4 off bottom castings, width over casting: 2550mm. |
Handling Damage Protection: | Miss stacking stub tubes fitted, protection plates fitted to top and bottom faces of frame members adjacent to corner castings, stainless steel wear plates fitted to side faces of corner posts at midpoints. |
Tank End Protection | Two removable stainless steel bumper bars will be fitted in front and rear of the tank. Tack welded against thief. |
पोत डिज़ाइन कोड: | ASME VIII Div.1/EN14025 where applicable |
रेडियोग्राफी: | शैल: | Spot |
समाप्त होता है: | पूर्ण |
निरीक्षण एजेंसी: | LR |
स्टैकिंग | प्रत्येक कंटेनर को 3 उच्च स्टैकिंग के लिए अनुमोदित किया गया है |
डिज़ाइन स्वीकृतियाँ: | IMDG T11, ADR/RID-L4BN, CSC, TIR, TC |