emailinfo@nttank.com
×

Get in touch

Customized Special Tank
Home > Products > Customized Special Tank
  • 3
  • 1
  • 2
  • 1
  • 2
  • 3
  • 1
  • 2
  • 1
  • 2

Swap Tank


Tank Type:Type UN T11, T12, IMO4 portable;
Insulated, steam heated, without top side rails fitted.
Capacity:30,000 -38,000 Litres +/- 1.5%
M.G.W.:39,000 kg
Design Pressure:4 Bar
Test Pressure:6 Bar
External Pressure:0.41 bar
Design Temp:-40°C to +130°C
Vessel Material:SANS 50028-7 WNr 1.4402/1.4404 (C<0.03%), equivalent to 316L
Shell: Cold Rolled 2B finish
Dished ends:Hot rolled or Cold rolled, and polished internally to 1.2 Micron CLA
Corrosion Allowance:0.2 mm
Main Frame Material:GB/T 1591 - Q355D or SPA-H (or equivalent)
Side Lifting Pockets:Not fitted.
Corner castings:To ISO 1161
Top: tank fitted with four ISO standard castings, width over casting: 2438mm. Obstruction plates welded in side facing apertures to prevent use.
Bottom: 4 off bottom castings, width over casting: 2550mm.
Handling Damage Protection:Miss stacking stub tubes fitted, protection plates fitted to top and bottom faces of frame members adjacent to corner castings, stainless steel wear plates fitted to side faces of corner posts at midpoints.
Tank End ProtectionTwo removable stainless steel bumper bars will be fitted in front and rear of the tank. Tack welded against thief.
Vessel Design Code:ASME VIII Div.1/EN14025 where applicable
Radiography:Shell:Spot
Ends:Full
Inspection Agency:LR
StackingEach container approved for 3 high stacking
Design Approvals:IMDG T11, ADR/RID-L4BN, CSC, TIR, TC


Inquiry

email goToTop